8
Fig.2
Change Default IP Network:
Step 3:
After successfully logon to the system, we need to change the
network configuration. Click
Device Setting > Network
to setup the service
network interface (WAN) parameters. Enter the desired IP address ( IPv4 or
IPv6 ), Subnet mask and default gateway or select “DHCP” or “PPPOE”. Apply
the change by clicking
Apply
button as fig (Fig.3).
Note: If your WAN port is setting in the 10.x.x.x segment IP address, please
make sure that you also need to change the LAN port to other segment such as
192.168.x.x
(Fig.3)
