21
Specify an IP Address:
Only the IP address listed can retrieve
the SNMP information. Normally, it will be the SNMP manager’s IP
address.
Specify a Subnet:
Only the network specified can retrieve the
SNMP information.
IP address:
The IP address for a trusted peer
Subnet Mask:
The network mask for a trusted peer
SNMP Trap:
SNMP Trap:
Enable SNMP trap or not
Destination:
The IP address for SNMP manager to receive the SNMP
trap
Community:
The communication name for sending the SNMP trap
>PABXMODE
This quick setting is dedicated to be used for Wellgate 2522 to become an
inter-connection in between PSTN Lines and analog trunk lines from
traditional PABX. The call scenario will be working as follows:
1.
For FXO incoming call, it will be routed to corresponding FXS
directly (Line1 to TEL1, Line2 to TEL2)
2.
For FXS outgoing call, it will be routed to VOIP except those prefix
set in FXO dialing Prefix.
3.
For VOIP incoming call from Sip Trunk number, it will be routed to
FXS based on the called number.
Note: If you are dialing to SIP trunk number, and hear the
dial tone from Wellgate 2522. Please check the SIP Trunk
configuration. It might be configured to option mode at “1
stage dialing”.
4.
When VOIP call is failed to be called out such as register fail (this
means registration to proxy accounts are all failure, but not include
SIP TRUNK number) or network issue, the call will be routed to FXO
as backup.
5.
When WellGate 2522 is malfunction, IP network disconnection or
power is failure, all calls will be directly bypassed to FXO
automatically.
