Well WRC7020N User Manual Download Page 224

Page: 224 / 244

WELL WRC7020N User’s Manual

224

5. Click on Microsoft in the Manufacturers list box, and then

click TCP/IP in the Network Protocols list box.

6. Click OK to return to the Network dialog box, and then click

OK again.

You may be prompted to install files from your Windows
95/98 installation CD. Follow the instructions to install the
files.

7. Click OK to restart the PC and complete the TCP/IP

installation.

Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:

8. Open the Control Panel window, and then click the Network

icon.

9. Select the network component labeled TCP/IP, and then

click Properties.

If you have multiple TCP/IP listings, select the listing
associated with your network card or adapter.

10. In the TCP/IP Properties dialog box, click the IP Address

tab.

11. Click the radio button labeled Obtain an IP address

automatically.

12. Click the DNS Configuration tab, and then click the radio

button labeled Obtain an IP address automatically.

13. Click OK twice to confirm and save your changes.

You will be prompted to restart Windows.

14. Click Yes.

Windows NT 4.0 workstations

First, check for the IP protocol and, if necessary, install it:

1. In the Windows NT task bar, click the Start button, point to

Settings, and then click Control Panel.

2. In the Control Panel window, double click the Network icon.

3. In the Network dialog box, click the Protocols tab.

The Protocols tab displays a list of currently installed
network protocols. If the list includes TCP/IP, then the
protocol has already been enabled. Skip to step 9.

4. If TCP/IP does not display as an installed component, click

Add…

5. In the Select Network Protocol dialog box, select TCP/IP,

and then click OK.

You may be prompted to install files from your Windows NT
installation CD or other media. Follow the instructions to
install the files.

After all files are installed, a window displays to inform you
that a TCP/IP service called DHCP can be set up to
dynamically assign IP information.

6. Click Yes to continue, and then click OK if prompted to

restart your computer.

Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:

Summary of Contents for WRC7020N





















































































































































































































































Search results

Summary of Contents for WRC7020N

Reviews:

Related manuals for WRC7020N

Brands by name

Popular brands

Well WRC7020N, User Manual

Search results

Summary of Contents for WRC7020N

Reviews:

Related manuals for WRC7020N

Brands by name

Popular brands