Well WH18/06 User Manual Download Page 95 | Manualshive

Page: 95 / 97

background image

95

10 seconds

1200 days 4800 days 9600 days

120 seconds

14400 days 57600 days 115200 days

Q26: Is it possible to display all the selected channels in one page on recorder?

A26: Yes, press Page key to get to Page all mode. Then, all selected channels in digits can
be displayed in one page.

Q27: Is it possible to print out the data in selected time from the recorder?

A27: Please note that it is not possible to connect printer directly to the recorder. It is possible

to print out the data in selected time from the Observer software. The printing data in
Excel is available from the Historical Viewer of Observer software.

If any error appears like floating point error when user attempts to print data out, then the
reason might be that data is not available for selected pens. Search it by a specific time
or by a period of time, make sure that data is shown on the trend. Select the pen
correctly, and then proceed the printing.

Q28: How many timers, counters and totalizers are available in a recorder?

A28: 6 counters, 6 timers and 18 totalizers are available in one recorder if this option been
ordered.

Q29: Can I use digital inputs for the counting application?

A29: The recorder can detect maximum of 30 pulses/Minute at a frequency of 0.5 Hz. The

possible alternative is usage of pulse to current 4-20 mA converter available in the
market.

Q30: When the user is trying to open Observer software, he might get the following message,

what is the next move?

A30: If Observer software file was corrupted in the PC, possible reasons might be virus,

installation of new software which is incompatible with your operating system. The

«
...
93
94
95
96
97
»

Summary of Contents for WH18/06


































































































Reviews:

No comments

Related manuals for WH18/06

Brand: janitza Pages: 28

Goldmann AT 870

Brand: Haag-Streit Pages: 20

Brand: X-Rite Pages: 45

Brand: X-Rite Pages: 22

Brand: A&D Pages: 39

Brand: Zeversolar Pages: 35

Brand: Zenner Pages: 52

Brand: Major tech Pages: 16

Brand: Zoetis Pages: 2

WJ-NU301K Series

Brand: i-PRO Pages: 24

WJ-NU101K Series

Brand: i-PRO Pages: 18

Brand: Palstar Pages: 37

Brand: LD Didactic Pages: 2

Brand: GMC-I Prosys Pages: 10

Brand: S&S Northern Pages: 5

Brand: Trebs Pages: 44

Greenlee CLM-1000

Brand: Textron Pages: 36

Brand: LEGRAND Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands