33
Active Time is the time that alarm status becomes active. Clear Time is the time when two
conditions are met. Firstly alarm status is cleared and becomes normal, and secondly the user
has acknowledged it. If any alarm occurs, the red buzzer icon on the top right starts to flash.
After the cause of alarm is no longer met and the alarm is acknowledged, then the red buzzer
icon disappears. When Clear Time shows Terminated this indicates that turning off the power has
terminated the alarm.
Report
Press Mode key to choose Report. This mode is only available after the option of Math. Counter,
Totalizer & FDA 21 CFR part 11 was ordered before. It produces reports about Counters 1-6,
Totalizers 1-18, AI1-AI18 MinMaxAve( Minimum, Maximum and Averaged values of analog inputs
in certain period of time ), Math1-Math18 MinMaxAve and All CH MinMaxAve. Press Report key
to select it as Report List ( all reports within a day, for example 3 reports for 3 shifts a day ), or
select it on daily, weekly or monthly base. Press directional keys
←
→
to choose the exact day,
week or month.
Figure 3 – 5
3.5 Status
Press Status key, the Status List displays
present status
of digital input DI, digital output DO
( alarm relay ), Counter and Totalizer. Press Mode key to choose any mode of DI, DO, Counter or
Summary of Contents for WH18/06
