Well WH18/06 User Manual Download Page 10 | Manualshive

Page: 10 / 97

background image

10

Accessories:

Part no.                          Descriptions

AI181, AI182, AI183      1, 2, 3-channel analog input card (TC, RTD, + mA, + V, + mV)
AI183V                    3-channel voltage input card (± mA, ± V, ± mV only)
DI181         6-channel digital input card
DO181   6-channel relay output card ( AC/DC )
AP181        24 VDC auxiliary power supply card for 6 transmitters
CM181     RS-232/422/485 + Ethernet communication module
CM182     Standard Ethernet communication module
PM181   90-250 VAC, 47-63 Hz power supply
PM182   11-18 VDC power supply module
PM183   18-36 VDC power supply module
PM184A   90-250 VAC, 47-63 Hz power supply with power plug and USA power cable
PM184E   90-250 VAC, 47-63 Hz power supply with power plug and European power cable

PM185   36-72 VDC 47-63 Hz power supply
PM186   20-28 VAC power supply,
MK181   panel mount assembly kit (grey color)
MK181B   panel mount assembly kit (black color)
MK183   bench top / portable handle assembly kit (grey color)
MK183B   bench top / portable handle assembly kit (black color)
CF128        128MB compact flash card
CF512        512MB compact flash card
CF102        1 GB compact flash card

AS181        Basic PC software Observer I
AS182        Extensive PC software Observer II
AO183I 3-channel current output card
AO183V   3-channel voltage output card
BT181        Boot ROM without Math, Counter & Totalizer
BT182        Boot ROM with Math, Counter & Totalizer & FDA 21 CFR part 11
SC181        The Slot cover of an empty slot
SNA10A   RS-485 to RS-232 converter
UMVR181   User Manual

Notes:

The rear Slots of the recorder will only accept up to 6 optional cards of input, output or 24

VDC power supply in any combination. For example, 12-channel analog input needs 4
pieces of 3-channel analog input card AI183. Now it is left 2 empty Slots for other cards.

The basic PC software Observer I is supplied free together with recorder. There is an

additional charge for the extensive PC software Observer II supplied with communication of
RS-232/422/485 or Ethernet.

◆

The Ordering Code of standard model without any option is WH18/06-4X00-010-110

刪除

:

PM184 90-250

VAC, 47-63 Hz power
supply with power plug

刪除

:

with USA cable

刪除

:

with USA cable

刪除

:

MK184 bench

top / portable handle
assembly kit (grey color)
with Europe cable
MK184B bench top /
portable handle assembly
kit (black color) with Europe
cable

«
...
8
9
10
11
12
...
»

Summary of Contents for WH18/06


































































































Reviews:

No comments

Related manuals for WH18/06

Brand: VeEX Pages: 2

Brand: IFR Pages: 46

Brand: J.P. Instruments Pages: 9

Brand: J.ASSY Pages: 13

Brand: Pangea Pages: 2

Brand: QEED Pages: 6

Brand: RHS Pages: 8

Brand: Leica Pages: 2

DIGIMET E30 Preset

Brand: MATO Pages: 20

Brand: Keysight Pages: 56

zelsius C5 -IUF

Brand: Zenner Pages: 28

Brand: R&S Pages: 46

Brand: General Pages: 16

Brand: WIKA Pages: 52

Brand: ZETA Music Systems Pages: 10

Brand: GE Pages: 16

Brand: SAND Pages: 15

Brand: SNV Engineering Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands