Welcat CTR-800-11W, User Manual

Page: 82 / 144

4-7 Terminal ID Setup Menu
4-29
Chap.
4
4-7 Terminal ID Setup Menu
Set up the terminal ID of the CTR-800-11W, as described below. The Terminal
ID should be set to a unique number for every terminal in both wireless network
communications and "Welfer II" serial communications. When the DHCP function
(P.4-23) is enabled, this setup can be made automatically.
1. From the System Menu, select "3:TermID."
2. Set the identification number using any combination
of three numbers.
Possible Setting Range
000 ∼ 999
For example, if you want to set the terminal ID to
010, press the keys in the order
, , .
Once the new value is set, press the key to confirm the change.
When using "Welfer II for Windows" for serial communications, it only recognizes
the last 2 digits of the terminal ID. Keep in mind that a terminal ID of "910" and
"010" are recognized as the same ID "10."
< Terminal ID >
ID： 999
< System Menu >
1:System 4:File
2:Network 5:Status
3:TermID 6:Test