Welcat CTR-800-11W, User Manual

Page: 104 / 144

4-12 Initialization of the CTR-800-11W
4-51
Chap.
4
4-12 Initialization of the CTR-800-11W
While using the CTR-800-11W, the contents in the memory storage area may be
corrupted for some reasons and the CTR-800-11W may not operate normally.
Although almost all those abnormalities are corrected automatically through the
System Menu, a serious error may not be able to be corrected.
In such a case, internal memory can be erased using the following method. This
will reset the CTR-800-11W back to factory settings.
Refer to "Appendix A - System Menu, Factory Settings" (Appendix A-2) for
information about the System Menu factory settings.
Be careful when performing this operation since this operation will erase the Sys-
tem Menu setup and any data or programs saved in the CTR-800-11W. Also, when
you perform this operation, turn OFF the suspend mode.
■
Initialization of the "System Menu"
1. Turn OFF the power of the CTR-800-11W.
2. Press the scan key,
key and the key simultaneously. Then press the
key. Then press the PW key. The System Menu will be initialized and
reboot.
Using this function, all the System Menu setup is initialized. The files saved on
the CTR-800-11W are not erased.