Welcat CTR-800-11W, User Manual

Page: 128 / 144

Appendix A System Menu Factory Settings
Appendix A -3
App.
A
Item Menu Tree Possible Setting Range Factory Settings
WEP
2:Network → 1:RF
→ 2:Security
→ 1:WEP
→ 1:WEP
Disable, 40bits,
128bits Disable
WEP TxKEY_ID
2:Network → 1:RF
→ 2:Security
→ 1:WEP
→ 2:WEP TxKEY_ID
KEY1, KEY2, KEY3,
KEY4 1:KEY1
Key Data
2:Network → 1:RF
→ 2:Security
→ 1:WEP
→ 3:KEY Data
Setting the contents
of each WEP key (1,
2, 3, 4).
Characters which can
be used are "0" - "9",
"A" - "F" and "a" - "f."
When a 40 bits is
selected, the WEP is a
fixed 10 characters.
When 128 bits is
selected, it is a fixed
26 characters
AuthenMode
2:Network → 1:RF
→ 2:Security
→ 2:Authen Mode
OPEN, SHARED OPEN
Preamble
2:Network → 1:RF
→ 3:Advanced
→ 1:Preamble
LONG, SHORT LONG
RTS_Threshold
2:Network → 1:RF
→ 3:Advanced
→ 2:RTS_Threshold
Even value of
between 0-3000
bytes 2432 (byte)
IP Address
2:Network → 2:TCP/IP
→ 1:IP Address
value which is divided
into four fields by a
period 000.000.000.000
Subnet Mask
2:Network → 2:TCP/IP
→ 2:Subnet Mask
value which is divided
into four fields by a
period 000.000.000.000
Gateway
2:Network → 2:TCP/IP
→ 3:Gateway
value which is divided
into four fields by a
period 000.000.000.000
DHCP Client
2:Network → 3:DHCP Not use
Run now
Run at startup 1:Not use
FTPHost Address
2:Network → 4:FTP
→ 1:Host Address
value which is divided
into four fields by a
period 000.000.000.000
FTP Username
2:Network → 4:FTP
→ 2:Username
up to 18
alphanumeric
characters No settings
FTP Password
2:Network → 4:FTP
→ 3:Password
up to 20
alphanumeric
characters No settings