Welcat CTR-800-11W, User Manual

Page: 77 / 144

Chapter 4 Settings
4-24
Chap.
4
4-6-4 FTP Setup
Set up for using the FTP client function, as described below. Automatic setup is
possible when the DHCP function (P.4-23) is enabled.
1. From the System Menu, select "2:Network."
2. Then select "4:FTP."
●
Host address
Specify The IP address of the FTP server. Automatic
setup is possible when the DHCP function (P.4-23) is
enabled.
●
User name
Specify the FTP server login user name using up to 18 alphanumeric characters.
To enter alphabetic characters, press the
key.
●
Password
Specify the FTP server login password using up to 20 alphanumeric characters.
To enter alphabetic characters, press the
key.
4-6-5 DNS Setup
DNS Set the DNS server address, as described below.
Automatic setup is possible when the DHCP function (P.4-23) is enabled.
1. From the System Menu, select "2:Network."
2. Then select "5:DNS."
3. Set the IP addresses for the primary server and
secondary server respectively.
< Network Config >
1:RF 5:DNS
2:TCP/IP 6:SNMP
3:DHCP 7:MAC
4:FTP
< FTP Client >
1:Host address
2:Username
3:Password
< Network Config >
1:RF
5:DNS
2:TCP/IP 6:SNMP
3:DHCP 7:MAC
4:FTP
< DNS >
1:Primary Server
2:Secondary Server