Welcat CTR-800-11W, User Manual

Page: 29 / 144

Chapter 1 Quick Guide
1-10
Chap.
1
Once setup is completed, first perform a wireless test (P.4-43) to see if the
terminal can communicate with an access point. Then perform a ping test
(P.4-45) to see if network communication between the terminal and computer
can be performed.
For information about the CTR-800-11W wireless functions, please refer to
"1-3 Wireless Communications" (P.1-7).
■
Cable communications
Item Description Reference
page
1 Terminal ID
Setup Set a unique ID number to each
CTR-800-11W.
"Welfer II for Windows" and
"WebGlider" use this ID to identify a
terminal. P.4-29
2 Serial
Communication
Setup Set the serial communication
conditions and the communication
port (IrDA/RS-232C). Setup "Welfer
II for Windows" and the terminal to
have the same communication
condition setup. P.4-8
Using the computer side DHCP client function (P.4-23), can be configured
at the same time.
When you use the DHCP client function, "WebGlider" is required.