Application
35
4. Adjust the pulse width:
You can also select a pulse width
from 50 μs to 250 μs using the
intensity button (Fig. 10, example
program TENS 28). Confirm your se-
lection with the button and con-
tinue to select the treatment length.
Fig. 10
5. Set the treatment length:
Press the intensity button to select a
treatment duration between 5 and
100 minutes (Fig. 11, example pro-
gram TENS 28).
Press the button
9
to confirm
your selection and deactivate pro-
gramming mode.
Fig. 11
6. Start and finish the treatment by following steps 5 through
7 in the previous chapter.
Steps for using the quick start programs
There are 3 quick start programs (Pb1, Pb2 and Pb3) in both
TENS and EMS mode for the neck, lower back and knee areas.
The quick start programs are selected with the following
buttons:
•
12
button: Neck
•
11
button: Lower back
•
10
button: Knee
1. Position the electrodes
4
on the desired area, for exam-
ple near the pain area on the neck, and switch on the de-
vice. Switch on the device by pressing the button
9
.
Summary of Contents for 96373
