Welbilt Convotherm OES 6.10 Mini Installation, Operation And Maintenance Manual Download Page 40

Page: 40 / 62

©McDonald’s Corporation · Planned Maintenance Manual · Revised 02/2019

Page 1 of 1

7018003_00 10/2011

Cleaning of (0ptional) Hood Front Screen

Weekly

PR 28 W2

Why

To keep front hood screen clean

Time required

3 minutes to prepare

3 minutes to complete

Time of day

End of day

For 24-hour restaurants: 4am

Hazards

Chemicals can cause eye and skin irritations at higher concentrations. Avoid contact with

your eyes and skin and always follow directions for use on packages and refer to Material Safety
Data Sheet (MSDS) as required.

Exercise caution and wear personal protective equipment (PPE).

Tools and supplies

Bucket, clean and sanitized

towels

Multi-Purpose Sink Detergent

Bucket, soiled towels

Procedure

Turn off the

hood before

beginning.

Remove Mesh

Filter.

Using the

handles, lift the filter up

out of bottom track.

Pull the bottom of the

filter out and pull down.

Spray

Filter.

Spray

filter with Sink Detergent
Solution. Completely soak
filter with Sink Detergent
Solution (APSC).

CAUTION!

Multi-Purpose Sink
Detergent may cause
irritations

Wash

Filter.

Wash

mesh filter in the sink.

Rinse

Filter.

Rinse

filter thoroughly in 3
compartment sink.

Dry Filter

Let filter air dry.

Replace

Mesh

Filter.

Slide top of filter into rack and

push bottom of filter into track. Push down to seat
filter.

THE
R

bination

en,

OES 6.10

Wee
kly

Summary of Contents for Convotherm OES 6.10 Mini































































Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands

Welbilt Convotherm OES 6.10 Mini, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for Convotherm OES 6.10 Mini

Reviews:

Related manuals for Convotherm OES 6.10 Mini

Brands by name

Popular brands