7 Commissioning
| Commissioning with PROFINET
29
2484940000/00/02.2017
Manual UR67-Multiprotocol
▶
Select the project in SIMATIC Manager
▶
Select the controller type via
Insert/Station
(e.g.
SIMATIC 300).
Adding a station
▶
Double-click on the project name so that the station
(SIMATIC 300) is displayed below in the directory tree.
▶
Click on the station (SIMATIC 300).
▶
Double-click
Hardware
on the right-hand side of the win-
dow.
The hardware configuration tool (
HW Config
) opens.
Hardware configuration tool
▶
The device catalogue is displayed on the right-hand side
of this window. If this does not occur, open the catalogue
via
View/Catalog
.
▶
In the device catalogue, select the mounting rail in use
(e.g. SIMATIC 300/RACK-300).
Selecting a mounting rail
▶
Double-click on the mounting rail or drag it to the left-
hand side of the window using the mouse.
The mounting rail (UR) is displayed with the open positions.
Profile rail with open positions
▶
Click on the second line of the
UR
table.
▶
From the catalogue, select the control unit in use and its
version (inscription on the control unit, e.g. 314-GEH04-
...).
