WEG SRW 01, User Manual

Page: 109 / 148

Monitoring
SRW 01 | 6-1
6
6 MONITORING
6.1 MONITORING PARAMETERS
The SRW 01 performs the monitoring of the following variables:
Parameter
(address)
Description Range
P002 Current % IN 0 to 999 %
P003 True RMS Current 0.0 to 6553.5 A
P004
Average Voltage True RMS 0 to 1000 V
P005
Line Frequency 0.0 to 99.9 Hz
P006 Relay Status (binary) bit0 = Error
bit1 = Trip
bit2 = Alarm/Fault
bit3 = Motor On
bit4 = Remote Mode
P007
Relay Status 2 (binary) bit0 = HMI 0 Key
bit1 = HMI I Key
bit2 = Speed Direction/Speed
bit3 = Motor Transition
bit4 = Cooling Time
P008 Power Factor 0.00 to 1.00
P009 Motor Reactive Power 0.0 to 6553.5 kVAr
P010
Motor Active Power 0.0 to 6553.5 kW
P011
Motor Apparent Power 0.0 to 6553.5 kVA
P012 Digital Inputs I11 to I16 Status (decimal) 0 to 63
P013 Digital Outputs O1 to O4 Status (binary) bit0 = O1
bit1 = O2
bit2 = O3
bit3 = O4
P014 Last Error 0 to 200
P015 Second Error 0 to 200
P016
Current Error 0 to 200
P020
PTC Value (Ohms) 0 to 10000 Ω
P023 Firmware Version (UC) 0.00 to 655.35
P024 Type of Protection (UC) 0 = PTC
1 = ELS
2 = PTC/ELS
P026 Firmware Version (UMC/UMCT) 0.00 to 655.35
P027 Firmware Version (EDU) 0.00 to 655.35
P029 Value of Addressing Switches 0000h to 00FFh
P030 L1 Phase True RMS Current 0.0 to 6553.5 A
P031 L2 Phase True RMS Current 0.0 to 6553.5 A
P032
L3 Phase True RMS Current 0.0 to 6553.5 A
P033
Line Voltage L1-L2 0 to 1000 V
P034 Line Voltage L2-L3 0 to 1000 V
P035 Line Voltage L3-L1 0 to 1000 V
P036 Earth Leakage Percentage Current 0 to 3334 %
P037 Earth Leakage True RMS Current 0.000 to 10.000 A
P042 Powered Relay Time 0 to 65530 h
P043 Motor Running Time 0 to 65530 h
P044
Meter kWh 0.0 to 999.9 kWh
P045
Meter MWh 0 to 65535 MWh
P046 Meter kVArh 0.0 to 999.9 kVArh
P047 Meter MVArh 0 to 65535 MVArh
P050 Motor Thermal Protection 0 to 100 %
P051 Current Imbalance Level 0 to 100 %
P052 Earth Fault Level 0 to 200 %
P053
Voltage Unbalance Level 0 to 100 %