3. REPAIRS
24
3.5
Seal replacement HOLLANDIA 700 - 20 series
1.
Remove panel (100).
2.
Remove seal (101) from panel.
3.
Remove all foreign debris from around steel panel.
4.
Apply bead of silicone in retaining channel all around steel panel perimeter.
5.
Install new seal, beginning at center rear frame retaining channel.
6.
Utilizing your thumbs, insert seal with enough pressure to be sure of flushness (tight to frame).
7.
The seal needs pressure to maintain proper alignment, when cutting excess leave approximately 6
mm extra then work it into retaining channel.
8.
Use super glue to close seam neatly. Apply glue to front corners of the seal to the under side of the
steel panel.
9.
Remove the remaining mastic and let the steel panel dry for two hours minimum.
10.
Remount the panel.
Summary of Contents for HOLLANDIA 700 - 20 Series
Page 2: ...2 ...
