3. REPAIRS
18
Figure 3.4.2.
10.
Remove the locator (13) being careful to remember the positioning of screws and the blocking
catch
(26).
11.
Pull mechanism all the way forward.
12.
Push the mechanism into tilt position as in point 9.
Be sure you do not inadvertently dislodge the mechanism. Keep the front of the mechanism down.
13.
(For the HOLLANDIA 700 - 40 series) Remove the front screw (31, 32) and slide the retraction
mechanism (33) forward. Do not take out.
14.
Slide mechanism further forward in tilt position.
15.
You can now see the cable (25). Lift out cable and pull forward out of the guide rail track.
16.
Inspect for proper length of new cable, grease and slide into rail. Make sure the oval shaped copper
head of the cable seats firmly and diagonally across the guide channel (figure 3.4.3).
Summary of Contents for HOLLANDIA 700 - 20 Series
Page 2: ...2 ...
