![WDT Solfog V2 Operating And Installation Instructions Download Page 12](http://html1.mh-extra.com/html/wdt/solfog-v2/solfog-v2_operating-and-installation-instructions_879010012.webp)
Brine fog maker, Type Solfog V2
Index: 01
Change date: 12/12/2017
Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx
Page 12 of 39
3.5
Transport / storage
The device must be checked for possible transport damage immediately after receipt.
ATTENTION !
The device can get damaged by frost or high temperatures. Prevent exposure to frost
during transport and storage! Do not store systems and devices next to objects with
high heat radiation or directly exposed to sunlight. The device may only be transported
and stored in its original packaging. Careful handling must be ensured.
The roller carrier of the dosing pump is not installed during transport and storage. This prevents
deformation of the hose.
Storage of fragrances / chemicals
DANGER !
The safety data sheets of the fragrance manufacturers have to be considered with
regard to storage!
The following points must be considered, among others:
Fragrances and the brine solution may only be stored in appropriately marked, original plastic
containers.
The fragrances and the brine solution must be stored in a separate storage room.
The environmental temperature may not exceed 20°C.
Also see Section
2.2.1 Handling chemicals.
ATTENTION !
Observe the regionally applicable regulations for handling chemicals!