Brine fog maker, Type Solfog V2
Index: 01
Change date: 12/12/2017
Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx
Page 9 of 39
Overview brine fog maker type Solfog V2
Key
1.
Display with 3 operating buttons
2.
Controller housing
3.
Main switch (covered, see
4.
Hose dosing pump
5.
Button connection
6.
Suction line brine solution
7.
Pressure line brine solution
8.
Warning notes
9.
Brine politainer
10.
Console for brine politainer
11.
Additional earth connection
12.
Pluggable politainer connection
13.
Fan
14.
Support for fragrance with reflux
valve
15.
Fragrance tank with filter star
16.
Exit pipe brine fog maker
17.
Level control fog maker tank (with
cable)
18.
Cable ultrasonic fog maker
19.
Fog maker tank
20.
Support fog maker tank
21.
Ultrasonic fog maker
22.
Installation plate
3.2.1
Control unit
The control unit has a control housing (02) of protection class IP64. All electronic components are
installed in it. At the control unit, the service parameters can be adjusted on a LCD-display with 5
lines and 3 operation buttons.
3.2.2
The dosing unit for brine solution
For the brine dosing a hose pump is used, conveying even the smallest
dosing volumes securely, even when there are air or gas pockets in
the suction line. Rotating rollers press the dosing hose against the
wall, squeezing out the liquid in front of the rollers while sucking in
new liquid at the same time. Hose pumps are extremely reliable and
particularly easy to operate.
Figure 1, Solfog V2
Figure 2, Hose pump function
01
03
05
04
02
08
12
11
07
06
10
09
13
14
15
22
07
19
18
17
16
20
21
