Brine fog maker, Type Solfog V2
Index: 01
Change date: 12/12/2017
Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx
Page 24 of 39
6.3.3
Fog time
Adjust the duration of the fog production and save with the Enter button.
6.3.4
Button-cycle (only in button operation mode)
Here the period button cycle is adjusted. During this period the adjusted fog
and Break times are performed in a recurring cycle.
6.3.5
Operating modes
There are
3 different service modes
. Depending on the order, the control is
preadjusted at the factory for the corresponding control type.
Adjust here the desired service mode and save with the Enter button.
1.
Cyclic operation
Starting from the connection of the tension, the device works with the
internal adjustments in the main menu.
2.
External control
Here the sentences pause and fog disappear in the start menu.
the
external control determines the dosing and pausing times (The control does not react on the
button signal!)
3.
Button service
In the button service the evaporation is started through the buttons in the
cabin. In this service mode the fog maker can also be operated with an external signal instead
of the button. The device is working as long as the signal is present.
6.3.6
Fan (Ventilator)
Adjust here the desired fan force to blow the brine fog into the cabin, and save
with the Enter button.
6.3.7
Filling time
When the device is connected, the fog tank must be first filled with the hose
pump. Adjust the filling time here, and save with the Enter button. The filling
time ends with the first triggering of the empty switch. If the empty switch does
not trigger during the filling time, the error message “Filling time surpassed” is
displayed.
6.3.8
Empty message
If the hose pump for the filling of the fog maker tank works longer than the
time that has been adjusted here, the error message “Tank empty” is displayed.
Adjust the desired time and save with the Enter button.
