Brine fog maker, Type Solfog V2
Index: 01
Change date: 12/12/2017
Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx
Page 8 of 39
3
Product description - delivery scope
3.1
Delivery scope / accessories
The brine fog maker type Solfog V2 is mainly composed of the following components:
Microprocessor control NT35 + HMI-NT35, V4.0 installed in casing.
Hose dosing pump SA for brine solution.
Level switch to fill the ultrasonic fog maker
Completely preassembled and prewired on assembly plate with console for 1 to 5 kg brine tank
Disinfection set with disinfection tablet, mixing tank and recipient
5kg germ free brine solution in politainer
Fog maker cone pipe of PVC, dia 40mm with fog maker cover
The following options are available as accessories:
1.
Button plate including key
2.
Button plate made of wood incl. illuminated button for operation in the cabin:
3.
Nozzle cover of stainless steel
4.
Fragrances, to fragrance the room
3.2
Product description
The brine fog making system type Solfog V2 is foreseen to produce a salty sea climate in rest spaces,
salt spaces, infra-red cabins and saunas. The brine fog maker makes a fog of the brine or also water,
by means of an ultrasonic fog maker. The brine is supplied to the cabin by means of an air flow
generated by the fan.
When the ultrasonic fog maker starts, at the same time, by means of a
hose pump (04)
there will
be a backfeed of brine in the fog maker tank. In this way the used brine is changed, and at the same
time the ultrasonic fog maker is cooled.
Optionally, simultaneously with the fog, also fragrance can be blown into the room. Therefore the
fragrance tank (15)
must be filled to the marking (maximum 50ml) with a fragrance for fragrancing
the room, and a filter star must be installed. The fan blows the fragrance by means of a
reflux valve
into the fog maker tank. There the fragrance is mixed with the brine fog and is blown into the
connected cabin.
Service without brine
When the Solfog is only used for water, and not for brine, then this is possible with a water politainer
or a fixed water connection. In case of a direct connection to the water line, the politainer is changed
by a fixed water connection ½“ and a solenoid valve.
CAUTION !
Only use “fragrance oil concentrates for room fragrancing”!
Default starting of the system is done with the
main switch (03)
.
Optionally, the device can be controlled by a button from the cabin, or by means of an external
signal.
