manualshive.com logo in svg

WDT Solfog V2, Operating And Installation Instructions

Share
Download
WDT Solfog V2 Operating And Installation Instructions Download Page 6

Brine fog maker, Type Solfog V2

 

 

Index: 01 

Change date: 12/12/2017 

Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx 

Page 6 of 39 

2

 

Safety   

2.1

 

Appropriate use 

The brine fog making device Solfog V2 may only be used for the purposes specified in 

Section 3.2

 of 

the product description! The locally applicable regulations regarding accident prevention, worker 
safety and drinking water protection must be adhered to. 

2.2

 

Safety instructions: 

The operating instructions must be carefully read and considered before installation and use! 
Work on the system and changes to the settings may only be performed by trained and instructed 
persons! It is particularly important that the regulations for worker safety and accident prevention 
as well as for wearing protective clothing are adhered to. 
 
 
Take note of the warning information on the device!   
Note for electrical tension  

   

 
Note for corrosion resistance 

 

 
 

2.2.1

 

Handling of chemicals, risks to persons and the environment 

Important information on the handling of chemicals and fragrances is provided in the 
safety data sheets of the chemicals manufacturers!  

With the brine fog maker a fragrance can be added to the brine fog.  The fragrance concentration 
in the brine fog is so low that it poses no risk to people. 

 

DANGER !   IRRITATION ! 
The undiluted fragrances may lead to irritation and allergic reactions. 

 

 

 

1.

 

Before the installation of the device all materials of the cabinet as well as supply and exhaust 

shaft on the salt containing water / air mixture in the room. 

2.

 

The dosing station does not have a medical approval. 

3.

 

We urge you to use only very clean, disinfected 

 

WDT

 

 brine solution.  

4.

 

If the device is not used for a longer period, it must be rinsed with distilled water in order to 
avoid incrustations.  

Summary of Contents for Solfog V2












































Reviews:

No comments

Brands by name

Popular brands

Load more brands