Wavez Kymera User’s Manual v
1.7.20181211
Page 14
Riding your Kymera
Know before you go
It is the operator’s sole responsibility to know and follow any and all rules
and regulations related to operation in any given
waterway.
Each state, council or specific waterway can have their own regulations
, so it’s critical to contact the proper author
ities prior
to operation.
If you should need help with classification or clarification about the Kymera to gain approval for your local waterway, please contact Wavez on
or call 13000 WAVEZ or +61 2 8006 8261
and we’ll be happy to help.
New board break in
–
IMPORTANT!
DO NOT OPERATE YOUR BOARD OUT OF THE WATER. This is particularly important prior to break in.
Ensure you have checked your board thoroughly and read
this whole User’s Manual
before proceeding.
During the first hours of operation it is critical to allow all components to properly wear in.
This is accomplished by simply taking care to run the board through its full RPM range repeatedly to full power, avoiding prolonged full power
operation more than a few minutes at a time for the first 2-3 charge cycles. Peak efficiency is typically achieved after 5-6 cycles.
Transport
Never transport your board with the battery installed
Transporting by vehicle
If you will be transporting your board to your destination using a vehicle, there are many easy ways to do it:
Inside your vehicle
The Kymera is a fairly small watercraft, which means that it will fit easily into most cars with the back seats down.
Here are three in the back of a Range Rover Sport, two in the back of an Audi sedan and one in the back of a Mazda 2!
