Wavez Kymera User’s Manual v
1.7.20181211
Page 10
Always install the battery just before operation and remove immediately after
Always remove the battery prior to opening the rear hatch
Never transport your board with the battery installed
Never attempt to use a battery which shows signs of cracking or other damage
Never attempt to use a battery which is emitting a smell of lithium gas or smoke
Never open the rear hatch when the battery is installed
Never allow your battery to become submerged
Never open the battery
Never leave your battery discharged. Failure to maintain at least 40% charge will result in permanent damage and will void your warranty
Always check the battery charge levels at least every 60 days and recharge to a storage level of 55V to maximise battery life
Never store your battery fully charged for more than (1) week.
Never clean your battery with high pressure water. Use the provided chamois to wipe it down and the squeeze bulb to expel any water or
debris from the connectors.
Battery charger
Your battery charger is a 220V input, 58.8V @ 20A output lithium battery charger. It comes with an Australian mains input plug and Kymera
output plug.
Like all electronic equipment, the battery charger supplied with the Kymera requires a good quality power supply to avoid any damage. If you
are unsure, it will be worthwhile buying a power line filter to ensure that any power issues don’t damage the batt
ery charger or battery.
The mains power lead is located at the rear of the charger.
The front panel includes the battery output cable (with a yellow end), fan and red/green indicator light
The charger will recharge a battery from empty to full in around 90 minutes.
Battery charger warnings
Always charge your Kymera batteries using only the included charger or another provided by Wavez specifically for this purpose.
Never charge non-Kymera batteries with this charger
Always choose a safe battery charging location with good air flow, ventilation and away from pets and people