Wavez Kymera User’s Manual v
1.7.20181211
Page 12
8
THE FIRST TIME YOU CHARGE YOUR BATTERY
Leave the battery connected for a further hour to give the battery cells the opportunity
to ’balance’, maximising the life of your battery and minimise the chance of any battery
problems.
9
You can now switch off the battery and the wall outlet, disconnect the battery from the
charger, and then the charger from the wall. Your battery is now ready for use. Return
it to its hard carry case and transport with care.
Battery installation
1
Open the front hatch and gently insert battery tail first into the tray.
2
Slide the battery back until the battery sits flat in the tray.
3
Rotate the battery locking bar to its full upright and locked position.
4
With the power switch off, locate the power plug and insert into the battery receptacle, making
sure the plug is fully seated.
5
With the bar locked and plug fully installed, switch the battery power switch to the ON position.