17
Power Up
(Cont.)
Rionfuse PVDF
To fuse a PVDF fitting, first choose the size:
Use the
UP/DOWN buttons
to scroll through the list of available sizes. When you get to the size that
you want, press the
START button
to confirm the selection.
Next, you will be prompted to select the type of heat cycle:
Use the
UP/DOWN buttons
to highlight the desired heat cycle. Press the
START button
to select
the desired heat cycle.
NOTE:
If this fusion is being performed in an environment where the ambient temperature is below
50°F, please consult Orion Engineering Department at
910-865-7530
for pre-heat instructions
before proceeding. All other fusions should be performed using the STANDARD heat cycle.
See page 32 for more information about fusing in low-ambient temperature environments.
Once the heat cycle type has been selected, see page 21 for instructions on completing the fusion.
SELECT SIZE
1.5 in
SELECT TYPE OF CYCLE
1. Standard
2. Preheat/Warm Up
Always consult with the fitting manufacturer for
instructions pertaining to when a Preheat Cycle
should be performed.
