IMPORTANT TIPS:
1
2
3
4
5
The WATTLE® door lock is delivered from the factory so that it
fits both right and left- hung doors, regardless of whether they
turn inwards or outwards. The multi point lock can be used both
on doors where the cylinder lock is mounted below and above
the handle. At the end of the assembly, the handles must also
be fixed correctly on the exterior and interior part with the two
screws and the supplied screwdriver.
When mounting the exterior part on the door, there are 2 arrows
on both sides of the square pin that must point upwards before
you pull it through the lock housing and the side of the square
pin that is red must be facing upwards.
The emergency keys have a different function than other key
systems. To unlock, insert the key and turn 90 degrees (optional
direction), when the key is horizontal, you can open the door
with the handle. To get the key out again, you have to turn back
90 degrees, then the key can be taken out. It is important to
know where the emergency keys are and that these are not in
the home if you only have one entrance.
You must use the supplied insulation between the outer and
inner part, otherwise condensation can form between the cold
and hot side, which can create moisture damage inside the
door and inside the lock.
When you are ready to assemble your device, it is important to
go verify the checklist before closing the door for the first time.
41
