MAINTAIN AND CREATE PIN CODES
The lock can have 1000 PIN code users added with User ID 003-999.
The admin users are added on 000 to 002. The admin users are
administrators who manage the other PIN code users. The pin code
can be from 1 to 8 numbers.
The factory set admin PIN code is 123 #.
If you have a Wattle MPL Pro with a fingerprint reader, it is important
that you store the master fingerprint BEFORE creating codes.
CHANGE THE PRIMARY ADMIN PIN
CREATE ADDITIONAL ADMIN PIN CODES
(Optional)
CREATE STANDARD PIN CODE USERS
Sequence:
* 000 123 * new admin code * new code again *
Example:
* 000 123 * 3456 *3456 *
(Admin codes are added to user number between 000-002)
Sequence:
* 001 Admin PIN * new admin PIN * new admin PIN again *
Example:
* 001 3456 * 6789 * 6789 *
(User codes are added to user number between 003-999)
Sequence:
* 003 Admin PIN * new pin code * new pin code again *
Example:
* 003 3456 * 2323 *2323 *
A
B
C
D
DELETE USERS
Sequence:
* User ID to delete, one off the admin PIN codes #
Example:
* 003 3456 #
If the user is deleted successfully, the red LED will blink.
The Admin users cannot be deleted this way. You can only change the
code on users 000 – 001 and 002. Example:
* 000 Admin PIN * new admin
PIN codes * new admin PIN codes again *
The display turns green and you get a long beep:
Programming
succeeded.
If the display turns red:
The sequence or admin PIN is
entered incorrectly or you have have taken too long to complete the
session. Please try again
47
