CHANGE BATTERIES
When the battery power is low, the lock will send out eight beeps when
you enter your pin code. Then you remove the cover on the inside module.
You do not need to program the lock again after changing the batteries.
RE-ACTIVATE AUTO LOCKING MODE (ALM)
HOW TO OPEN THE DOOR FROM OUTSIDE
CHANGE THE VOLUME ON THE LOCK
In this mode you can not lock the door on the outside by pressing the
button (convenient when the lock is used in an office / store)
When this function is activated, any wrong PIN code access attempts
on five consecutives occasions will stop the lock from working for three
minutes. All key buttons on the outside keypad will cease to function.
TO CONNECT
Sequence:
# 5 Admin PIN # 1
Example:
# 5 3456 # 1
TO DEACTIVATE
Sequence:
# 2 Admin PIN # 0
Example:
# 2 3456 # 0
TO DISCONNECT
Sequence:
# 5 Admin PIN # 0
Example:
# 5 3456 # 0
TO ACTIVATE
Sequence:
# 2 Admin PIN # 1
Example:
# 2 3456 # 1
Sequence:
# 1 Admin PIN code # 0
Example:
# 1 3456 # 0
The display blinks green, and you will hear a long confirmation tone.
Then enter any valid code and push #. The display blinks red and you
will hear a long confirmation tone. Now you will have to unlock the door
each time you want to access the property.
Touch the display, it will light up in bright blue. Enter your pin and end with
#. You will now hear the engine engage the handle, and you can now
open the door.
Sequence:
# 0 one off the Admin PIN’s # one off the following codes;
0 muted, 1 low, 2 normal
Example:
# 0 3456 # 1 (the standard is code 2 normal)
DISCONNECT THE POWER BUTTON
ANTI MALICIOUS-USE SET UP
50
