ACTIVATE TEMP-UNLOCKING MODE (TUM)
Sequence:
# 1 Admin PIN code # 1
Example:
# 1 3456 # 1
The display blinks green, and you will hear a long confirmation tone.
The lock is now ready for the TUM mode, but the door is still locked. To
activate TUM enter any valid
code
and push
#
. The display once again
blink green. The door is now consistently unlocked.
The same codes created on the outer part will also work on the inside
keyboard. To lock the outer handle from the inside (when TUM is activated),
you can press #, and the handle outside is locked. You can also lock by
entering the code on the outside if you leave your home.
You can also lock the indoors handle by entering the code followed by #.
The lock starts a countdown of 20 sec. before locking the inner handle. This
function is used to control, for example, young children who should not
be able to open the door or if you have a dog that can open the door by
pulling down the handle.
The handle is reactivated by pressing the code followed by #
To activate the handle on the outside, hold the button for approx. 5
seconds. The door will then be open from the outside and will then be open
until you press the power button again or enter a code from the outside.
To lock the outer handle from indoors (when TUM is activated), press the
power button and the handle outside is locked. Hold down the button for
2 seconds and the outer handle will reactivate and remain open until the
button is quickly pressed again.
To lock the door you can also pin your code from outside when leaving.
Please be aware that using this feature may be at the expense of
safety in relation to fire or smoke development as your main door is an
emergency exit. The function is therefore mainly intended to lock the
inside handle when leaving the house so that intruders cannot break in
by smashing a window to unlock the door.
INDOOR KEYPAD
(Valid for locks with DISPLAY interior unit)
POWER BUTTON
(Valid for locks with STANDARD interior unit)
49
