Waterous AQUIS 1.5, Installation, Operation And Maintenance Instructions

Page: 2 / 64

Table of Contents
Safety 4
Safety Precautions 4
Safety Precautions—Continued 5
Introduction 7
Using this Document 7
Viewing the Document Electronically 7
Printing the Document 7
Locating the Serial Number 7
Product Overview 8
Standard Components 8
Optional Components 9
AQUIS 1.5 Components 10
AQUIS 3.0 Components 12
AQUIS 1.5 and 3.0—Under the Cover 14
AQUIS 6.0 Components 16
AQUIS 6.0—Under the Cover 18
Overview Diagram—Typical 20
System Overview 21
Dual Tank System Overview—Optional 22
Dual Tank System Overview—Optional 23
Flush System Overview—Optional 24
Flush Kit Overview—Optional 25
Component Overview 26
Hose Lines and Fittings 26
Supply Hose 26
Inject Hose 26
Fittings 26
Bypass Hose 26
Pump Mounting Hardware 26
Power Cables 26
Concentrate Tank 26
OIT/HMI Cable 26
Flowmeter Cable 26
Cable Extension 26
USB Port 27
Supply Tank Level Sensor 27
Supply Tank Level Sensor Cable 27
Supply Tank Shutoff Valve 27
Wye Fitting with Strainer 27
Concentrate Inject Check Valve 28
Flowmeter 28
Inject/Bypass Valve 28
Flowmeter Tee 29
Master Waterway Check Valve 30
Concentrate Injector 30
Drain Port 30
Foam Manifold 31
Concentrate Injector 31
Drain Port 31
Pressure Regulator Valve 32
Operator Interface Terminal (OIT) 33
Digital OIT 33
Manual OIT 33
Accessory Terminal Strip 34
Installation 35
Installation Precautions 35
Disconnecting the Frame Ground 35
Modifying the Foam System 35
Preparing for the Install 36
Installing the Vented Oil Cap 36
Determining the Pump Assembly Location 37
Locating the Pump Assembly Mounting Holes 37
Locating the OIT Mounting Holes 37
Installing the Pump Assembly 37
Installing the OIT 38
Connecting M12 Cables to the Control Box 38
Installing the Master Waterway Check Valve 39
Installing the Foam Manifold 39
Installing the Flowmeter Tee 40
Installing the Supply Hose 41
Installing the Injector Hose 41
Connecting the Bypass Hose 41
Fittings 41
Removing the Cover 42
Connecting the Power Supply 42
Installing the Tank Level—Sensor Cable 44
Installing the Wye Fitting with Strainer 44
Installing the Concentrate Inject Check Valve 45
Installing the Cover 45
Installing the Drain Lines 45
Calibrating—Manual OIT 46