Waterous AQUIS 1.5, Installation, Operation And Maintenance Instructions

Page: 8 / 64

8
|
64
Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting
Standard Components
This table shows the standard components that are associated with the different AQUIS foam system configurations.
Foam Only or Traditional CAFSystems Foam Only or Traditional CAFSystems ™ ™ ONE STEP ONE STEP ™ ™ and Eclipse GEN 2.0 and Eclipse GEN 2.0 ™ ™
Included Included
with with
Kit L1210 Kit L1210
AQUIS 1.5 AQUIS 1.5 AQUIS 3.0 AQUIS 3.0 AQUIS 6.0 AQUIS 6.0 AQUIS 1.5 AQUIS 1.5 AQUIS 3.0 AQUIS 3.0 AQUIS 6.0 AQUIS 6.0
Concentrate Wye Strainer Concentrate Wye Strainer 3/4 inch 3/4 inch 1 inch 3/4 inch 3/4 inch 1 inch X
Concentrate Injection Check Valve Concentrate Injection Check Valve 3/8 inch 3/8 inch 3/8 inch 3/8 inch 3/8 inch 3/8 inch X
Cables Cables
OIT/HMI (8-pin) 6 Meter 6 Meter 6 Meter 6 Meter 6 Meter 6 Meter X
Flowmeter (4-pin) 3 Meter 3 Meter 3 Meter 3 Meter 3 Meter 3 Meter X
Tank Level Switch (2 wire) 4 Meter 4 Meter 4 Meter 4 Meter 4 Meter 4 Meter X
Foam Tee Foam Tee
or or
Manifold Manifold
Tee with Flowmeter Standard Standard Standard Not Available Not Available Not Available
—
Master Waterway
Check Valve
(Includes a concentrate
injection port)
Upgrade Upgrade Upgrade Not Available Not Available Not Available
Manifold
(Includes waterway
check valve, flowmeter and
concentrate injection port)
Upgrade Upgrade Upgrade Standard Standard Standard
Operator Operator
Interface Interface
Terminal Terminal
(OIT) (OIT)
Manual Standard Not Available Not Available
Not Used
(See Note 1)
X
Digital Upgrade Standard Standard
Operation Operation
Instruction Instruction
Panel Plate Panel Plate
Manual OIT
No
(See Note 2)
Not Available Not Available
Not Used
(See Note 1)
X
Digital OIT Yes Yes Yes
1. For ONE STEP and Eclipse GEN 2.0 CAFSystems, the OIT port on the controller is connected to the system PLC which connects to the Tellurus™ HMI
panel.
2. Manual OIT plate includes operation instructions.