Waterous AQUIS 1.5, Installation, Operation And Maintenance Instructions

Page: 27 / 64

27
|
64
Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting
USB Port
The USB port is used to install program updates to the controller. It is a USB
type-B connector to connect to the control box (Figure 3 and Figure 5) .
Supply Tank Level Sensor
This sensor alerts you when the concentrate reaches a predetermined level
in the supply tank. A sensor not supplied in this kit. Contact Waterous for
information about obtaining a sensor.
Horizontal Sensor Vertical Sensor
Figure 6 Figure 7
Supply Tank Level Sensor Cable
This cable connects the level sensor to the control box. It is 2 bare wires,
without connectors.
Supply Tank Shutoff Valve
This valve stops the flow of concentrate into the supply hose lines ( Figure 8 ).
The valve is an optional component available through Waterous. A supply tank
shutoff valve is required per NFPA.
Figure 8
Wye Fitting with Strainer
This fitting incorporates a strainer that collects debris that could damage your
foam system ( Figure 9 ). It is available in 3/4 and 1 inch NPT.
Figure 9