Waterous AQUIS 1.5, Installation, Operation And Maintenance Instructions

Page: 45 / 64

45
|
64
Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting
Installing the Concentrate Inject Check Valve
1. Use the arrow on the check valve to determine the flow direction of the
concentrate ( Figure 37 ).
Figure 37
2. Install the check valve into the injector fitting in the proper orientation.
Installing the Cover
1. Locate the 3 screws and washers that you removed from the cover.
2. Use the 3 screws and washers to secure the cover to the bracket
( Figure 38 ).
1
3
2
1. Screw 2. Washer 3. Cover
Figure 38
Installing the Drain Lines
Install a dedicated line to the drain port on the check valve or manifold to
remove the unused solution and to relieve pressure ( Figure 39 and Figure 40 ).
1
1
1. Drain port
Figure 39 Figure 40