![background image](http://html1.mh-extra.com/html/waterlogic/purezza-wl2fl-firewall/purezza-wl2fl-firewall_manual_3644358071.webp)
WL2FL
Manual
Page 73 – Revision AUS-04-23
Thermostat or
overheat “open” on
Hot Tank
Turn Power off. Check OHM’s resistance across terminals on each
Thermostat and Overheat separately.
Good components will indicate a closed circuit (continuity) or zero OHM’s on
the meter.
Replace components as necessary.
Loose or improperly
connected wire(s) to
the Heating Element
/ Hot Tank.
Visually inspect wire leads gong to the hot tank; confirm proper connections
to the heating elements.
Hot tank life is 3-5 years, depending on usage.
Heating Coil Not
Heating
Turn Power off; Drain hot tank; Use multi-meter to check Heater Element for
continuity up to 96.8Ω
–
115.2Ω resistance.
Hot Tank must be empty if you are checking for continuity.
Replace Hot Tank as necessary.
Improper Jumper
Settings
The unit has been changed to a cold/ambient setting (JP9 has been moved
from Pin 1 and Pin 2).
Verify that Jumper Pins are located properly for Hot Water Option.
Summary of Contents for PUREZZA WL2FL FIREWALL
