![background image](http://html1.mh-extra.com/html/thetford/bravura-31113/bravura-31113_replace_1106684001.webp)
Part No.
31113
Made in the U.S.A.
P.O. Box 1285
Ann Arbor, MI 48106
www.thetford.com
Questions? 1-800-543-1219
1
Printed in U.S.A.
Part No. 31141 Rev. B 02.19.2020
Water Module
K1
Kit Contents: K1
T000155A
New
Ref
Description
K1
A
Water Module / Screws (2x)
NI
B
Water Supply Line
NI
C
Hairpin Clip
NI
D
Water Nozzle Tube
NI
E
Left Link
NI
Not Included
Tools Needed:
■
Phillips Screwdriver
Wear protective gloves and eye wear when
you touch material that has been in contact
with human waste.
Disinfect your tools and work surface after you
complete this replacement procedure.
REDUCE HOLDING TANK ODOR: Rinse the
toilet with water, drain the holding tank, and
add Thetford Holding Tank Deodorant.
Replace Part
1. Turn off RV water supply per RV Owner’s Manual.
2. Pull straight up to remove existing Seat & Cover Assembly.
3. Disconnect
B
(Fig. A).
4. Slip off
C
on right side of crank arm (Fig. B).
5. Remove two screws at top of
A1
(2x) (Fig. C).
6. Slide
A
back toward wall, out of cradle and off (Fig. D).
7. Slide
E
(left) off - it will fall. (Fig. D).
8. Hold
D
(Fig. D) and twist
A
to separate. Discard
A
.
9. Connect
D
to
K1
(new part).
10. Attach
E
.
11. Slide
K1
into cradle. Be sure tongue
fi
ts into slot, and screw
slots line up.
12. Replace
A1
(2x). Tighten.
13. Replace
C
.
14. Reconnect
B
.
15. Turn on RV water supply. Check for leaks at back of toilet.
16. Flush test toilet.
17. Replace Seat & Cover Assembly to toilet.
NOTICE
AVIS
AVISO
CAUTION
!
NOTICE
Fig. A.
31113-C
Fig. C.
Fig. B.
Fig. B.
B
C
Fig. D.
D
A1
E
K1