Installation of heat pump and domestic hot water tank
21.11.2015
33 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
7.2.11
Removing the housing
A disassembly tool is delivered with the heat pump. Use this tool to avoid damage
while you are removing the housing parts.
The housing parts are removed in reverse order of assembly (see figure 16).
Procedure:
Keep enough clearance with the tool to the upper and lower metal edge.
So you can’t damage the retaining bolts (see Figure).
The removal tool is driven with moderate force, by hand, into the gap be-
tween the front and side panel.
