Installation of heat pump and domestic hot water tank
21.11.2015
27 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
7.2.7
Connection terminal (compressor and e-heater (230 V) (EcoTouch Ai1 Geo)
Mounting position, see chap. Fehler! Verweisquelle konnte nicht gefunden wer-
den..
The connection terminal (230 V items) has to be mounted at the heat pump, see
arrow. Therefore, you have to remove the isolation bloc. The terminal positions are
describted in chapter 9.4.
Procedure:
Remove the construction bar.
Remove the isolation bloc. It is no longer needed.
Lay the connection line next to the construction, see photo.
Fit the connection terminal at the construction with two screws.
