Components and installation
21.11.2015
16 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
4.3.5
Electronic heat pump control
The heat pump control (control panel is pictured) is included in the delivery scope
of the WATERKOTTE heat pump.
Use in other than WATERKOTTE heat pumps will void any warranty claim.
The control is used to control and monitor heating systems that are operated with
WATERKOTTE compact heat pumps according to technical guidelines of
WATERKOTTE Wärmepumpen GmbH.
The following tasks are performed: everything to do with regulation (depending on
the external temperature with pilot room guidance), control, monitoring, self-
diagnosis, saving of data in cases of breakdown.
WATERKOTTE explicitly states that function warranty will become void if used on
systems not approved by WATERKOTTE. Any liability for consequential damages
due to incorrect function within these systems shall be explicitly excluded.
Info: Technical details, operation and warning messages (see
Operating manual
for Heat pump control)
.
4.3.6
Sensors
The control's sensor system consists of: Pressure transmitter for evaporation and
condensation pressure, sensors for temperature detection in all circuits, external
wall sensor in accessories kit, pilot room sensor and hot water sensor (optional).
4.3.7
COP counter
A WATERKOTTE COP counter is already integrated in the heat pump control. For
additional information, please refer to
Operating manual for Heat pump control.
4.3.8
Options
Mixer accessories: sensor, additional control module.
Expansion kit: for pool heating, thermal use of solar energy, mixer circuits.
Pool accessories: sensor, 3-way-valve, additional control module.
Buffer tank: standard tank.
Heat source accessories: heat exchanger for ground water, flow rate monitoring,
antifreeze concentrate, heat source distributor.
Solar accessories: sensor, additional control module, heat exchanger, solar collec-
tors.
Heating: underfloor heating system, underfloor heating head station, distribution
cabinet, convectors.
Heat pump accessories: Digital soft starter (for retrofitting at 3 x 400V compressor
design).
