Safety
21.11.2015
9 / 76
Z20469
Copyright
2013 by: WATERKOTTE GmbH. Subject to changes.
1.4
Specific types of hazards
To avoid damage to machine or life-threatening injuries during installation of ma-
chine, the following points must be observed:
Machine parts that are improperly placed or incorrectly attached can fall down
or overturn.
Sharp-edged machine parts that are still exposed and accessible can result in
injury.
Incorrectly installed lines (e.g. insufficient bending radius) can cause smoulder-
ing and cable fires.
1.5
Operator's duty of care
Your WATERKOTTE heat pump has been designed and built on the basis of a risk
analysis and after careful selection of standards to be observed. Thus, your heat
pump is state-of-the-art and provides for maximum safety. In practice, however,
this safety can only be ensured by taking all necessary measures. As operator of
the heat pump it is your responsibility to plan these measures and oversee their
implementation.
You must ensure that:
The heat pump is only used as intended (see also chapter 1.1, „Intended
use“).
The heat pump is only operated in perfect, fully functional condition and safety
devices are checked regularly to ensure that they are working properly.
The operating manual is available in perfect condition at the heat pump at all
times.
The heat pump is operated, maintained and repaired only by adequately quali-
fied and authorised personnel.
None of the safety and warning notices on the heat pump are removed or
damaged.
1.6
Other applicable documents
Operating manual: WWPR WATERKOTTE heat pump controller.
