Installation and connection
21.10.2015
18 / 60
Copyright
2014 by: WATERKOTTE GmbH. Subject to changes.
5.7
Installation of cover and cladding panels
To prevent transport damage, the cover, front and side panels of the heat
pump are enclosed separately.
After establishing all connections, mount them to the required positions (in-
sert and press).
5.8
Disassembly of cladding panels
The heat pump is provided with a disassembly tool. Use this tool to remove
the cladding panels to prevent damage.
Procedure:
Keep enough distance with the disassembly tool to the upper/lower
panel edge so as not to damage the retaining bolt (see figure).
The disassembly tool is manually driven into the gap between the front
and side panel with moderate force.
5.9
Disassembly of cover and cladding panels (outdoor module)
Cover and cladding panels are fixed with screws. In the case of a disas-
sembly the screws must be removed with an appropriate screwdriver.
