Safety
21.10.2015
7 / 60
Copyright
2014 by: WATERKOTTE GmbH. Subject to changes.
Leaking refrigerant can result in severe personal injuries (suffocation or hy-
pothermia)!
Avoid direct contact with refrigerant!
When selecting the installation site, observe the minimum volume under
consideration of the refrigerant applied (as per EN 378-1).
Risk of burns!
During operation, surface temperatures (compressor and pressure line) can
climb above 100 °C or drop below 0 °C.
Do not remove housing cover during operation!
Allow heat pump to cool down before removing cover.
Risk of injury!
Risk of chemical burns when skin comes in direct contact with lubricant
leak.
Wear suitable clothing when performing maintenance work on the heat
pump!
Do not put your fingers or others into the fan, or evaporator.
The inside parts of the heat pump may run at high speed or high tempera-
ture, they could cause serious injury. Do not remove the grills on the fan
outlet and top cover.
The hot water probable need to mix with cold water for terminal usage, too
hot water (over 50 °C in the heating module may cause injury.
The installation height of power supply should be over 1.8m, if any water
may spatter, the module can be safe from water.
Electrostatic charge!
Electronic components can be damaged by electrostatic processes.
Ground yourself before touching electronic components.
Risk of total loss!
Repeated restart of the heat pump can result in total loss! In case of heat
pump failure, an inspection by qualified and authorised personnel must be
performed before restart.
