Components and installation
21.10.2015
11 / 60
Copyright
2014 by: WATERKOTTE GmbH. Subject to changes.
3
Components and installation
3.1
Heating system Basic Line Ai1 Air BS 7010 / BS 7006
The newly developed heating system was designed as a compact air
source heat pump for outdoor installation. It is suitable for heating and
cooling low-energy buildings.
Thanks to the inverter-controlled compressor, the Basic Line Ai1 Air and BS
7010 operate extremely energy-efficiently. Due to the infinitely variable
adjustment of the power it impresses with high performance. Even at
outdoor temperatures of -15 °C, flow temperatures of 55° C are possible
The outdoor module contains all the heat pump technology (nicht der not
the condenser). The control moduel with the tank (Ai1 Air) or the hydraulic
module BS Hyd 5010 are installed in the building.
3.2
Structure and control
Complete hot water heating system with integrated central hot water supply
(option), consisting of: heat generator (heat pump), regulation and electrical
control, complete electrics and control system, semi-graphic display.
3.2.1
Electronic heat pump control
The heat pump control is included in the delivery scope of the
WATERKOTTE heat pump. Use in other than
WATERKOTTE heat pumps will void any warranty claim.
Info: Technical details, operation and warning messages (see
Operating
manual for heat pump control
).
The control is used to control and monitor heating systems that are operat-
ed with WATERKOTTE compact heat pumps according to technical guide-
lines of WATERKOTTE Wärmepumpen GmbH. All tasks to do with control
are fulfilled (depending on the external temperature, control, monitoring,
self-diagnosis, saving of data in case of breakdown, etc.
WATERKOTTE explicitly states that function warranty will become void if
used on systems not approved by WATERKOTTE. Any liability for conse-
quential damages due to incorrect function within these systems shall be
explicitly excluded.
