Waterco OXISWIM, Installation And Operation Manual

Page: 27 / 45

OXISWIM MANUAL
P a g e 27 | 45
7 WATER PREPARATION
IMPORTANT: The following steps must be followed to ensure the pool is correctly prepared.
Measure the pool volume with reasonable accuracy
7.1 Balance the Pool Water
I. Ensure the pool water is balanced within the parameters set out in section 5.1
and within these tolerances be balanced to the Langelier Saturation Index within
a range of -0.5 - +0.5
II. Standard pool balancing chemicals may be used for Calcium Hardness,
III. Alkalinity and pH. If you need to lower the pH, Perox pH Control can be used.
IV. Add sanitiser directly into the pool to achieve the recommended level as per the
installation guide in section 5.1