Waterco OXISWIM, Installation And Operation Manual

Page: 40 / 45

OXISWIM MANUAL
P a g e 40 | 45
11 GENERAL SAFETY GUIDELINES
• In emergencies, the instrument should be switched off immediately. First, disconnect
the power cable from the power supply.
• When installing, always observe local regulations.
• The manufacturer is not liable for any unauthorised use or misuse of this product
that may cause injury or damage to persons and/or materials.
• The controller should be interlocked with a no-flow protection device to
automatically shut off the peristaltic pumps when there is no flow.
• Peristaltic pumps and accessories must only be serviced and repaired by qualified
and authorised personnel.
Instruments must be accessible at all times for both operation and
servicing.
• Access must not be obstructed in any way.
• Always discharge the liquid end before servicing the instrument. Empty and rinse the
liquid end before working on a peristaltic pump that has been used with hazardous
or unknown chemicals.
• Always read the material safety data sheets for all chemicals used.
• Always wear protective clothing when handling hazardous or unknown chemicals.
This instrument must be operated and serviced by trained
technicians only.
• All connection operations must be performed while the instrument is not connected
to the main power supply.
• Adequate measures should be taken to prevent the cross-connection of chemicals.
• Chemical feeding should be stopped during backwash cycles and periods of no flow
as these conditions may introduce the potential for chemical overdosing.
• Not doing so may result in elevated chemical concentrations in the pool or spa.
• If the supply cord is damaged, it must be replaced by either the manufacturer, its
nominated service agent, or a similarly qualified person to avoid a hazard.