39
5.4 Basic Phone to Alarm Commands
The following section contains information and instructions on
5.4.1 To Change Your PIN code
Instructions below show you how to change you PIN code via SMS. You may wish to change the PIN code
from the default code 000000, to something more secure and familiar to you. This code can contain numbers
and letters and must be 6 characters long.
BY SMS ONLY
Type your
PIN code
and
PINXXXXXX
, you can change the PIN code for accessing features
of the alarm system. Where ‘XXXXXX’ is the new
PIN code you want to have in the alarm system.
NOTE
: the PIN code must be 6 digits in length, 0-9,
a-Z
.
EG: 000000
PIN
123456 – will change the current
PIN code to 123456.
You will then receive a reply SMS message back stating NEWPIN: 123456.
**** The DEFAULT PIN CODE is - 000000 ****
5.4.2 To Change The ID Of The System
Changing the ID or identity of the system will allow you to recognise the specific alarm system that is
messaging you. This is especially useful when more than one alarm system is being used, i.e.: for different
stores.
BY SMS ONLY
You can change the ID Message that
is displayed at the start of the SMS messages you
receive. Where XXXXXX is a code to distinguish the
alarm from another system. Up to 19 characters can
be used for the ID.
You will then receive a reply SMS message back
saying:
ABC123. ID change passed.
EG: 000000
ID
ABC123 – will change the current ID
to ABC123 as shown in the pictures opposite.
000000
PIN
123456
000000
ID
ABC123
ABC123:
ID Change
passed.
ABC123: System is
armed.
