35
5.1.2 Delete all remotes
Set dipswitches 1 and 2 to on.
Press the DELETE button.
Now all the remotes that you wish to keep must be added back in. Follow
the procedure above To Add a New Remote.
Set all dipswitches to off.
5.1.3 Add a detector
Set the dipswitch to on for the zone you wish to add.
I.e. To add a detector into zone 3, set dipswitch 3 to on.
Press the ADD button
Open the detector you
wish to add
If you are learning a Passive Infrared detector
Remove the front cover or press the tamper switch then release.
Learning mode will timeout in 60 seconds.
When the system has successfully received the code from the detector,
the internal screamer will beep the number of times of the zone that the
detector has been learnt into.
The system will automatically enter Walk Test mode. During this time,
the internal screamer will beep the number of times of the zone that has
been triggered. Label the detector with its zone number for future
reference. Detectors, which have been set to 24-hour mode, will still
trigger the alarm. If a tamper switch is pressed on the main control unit
or a wireless detector the internal screamer will beep once.
Set all dipswitches to off.
DELETE
D
ADD
A
