26
2.2.11 Wireless Keypad
This section shows you how to install a wireless keypad for your system.
The Wireless Keypad is designed for use with your Watchguard SMS 2010 Alarm
System, offering arm, disarm, home arm and panic functions. The Wireless Keypad
offers the security of a user-programmable 4 Digit PIN code.
The Wireless Keypad is ideal for the following situations:
•
Where you have a need for more than 8 remote controls that your Watchguard SMS 2010 Alarm can
accept, or for instances where you do not wish to supply remotes.
•
Where the added security of a PIN code is desired to activate the system, with the added ability to
easily change the PIN code at any time.
•
Where you would like a wall-mounted keypad, rather than carry a remote control.
The Wireless Keypad also offers the following:
•
Tamper protection – any attempt to open the casing of the keypad will initiate a complete alarm event
even if the system is disarmed.
•
Auto Lockout – if a sequence of more then 16 incorrect key presses is entered the keypad will
automatically be disabled for 1 minute. If keypad is disabled 3 times consecutively a keypad tamper
event will be triggered.
a) Insert Battery
Remove the fixing screw from the bottom of the Wireless
Keypad and remove the back-plate.
Remove the battery holder fixing screws.
Connect the 9V battery provided to the battery clip and
replace battery holder and back-plate fixing screws.
The Wireless Keypad is suitable for mounting either indoor or outdoor as it is water resistant. It should be
mounted at the main point of entry of the premises. To cover multiple points of entry additional Wireless
Keypads may be used. The mounting position must be isolated from any metallic objects or framework as this
could diminish the radio range.
