21
Note:
If for any reason your external siren does not beep when you arm & disarm your Watchguard SMS
2010, simply turn off the External Siren Key switch, wait for 10 seconds and then turn back on again. Now
immediately (within 3 seconds) arm the system using your remote control. You should now hear 1 beep from
the external siren.
c) Learning in the Siren Unit to the
Main Control Unit
1. Switch ON the wireless siren by turning the key-switch
to the ON position. The strobe will flash for a few
seconds. This means the device is active and ready to
learn in the Watchguard SMS 2010.
2. Immediately arm and disarm the Watchguard digital by
using the remote control.
3. If the learning is successful, the Wireless Siren will
respond to the Watchguard Digital when armed and
disarmed. The Wireless Siren will beep once when
armed and twice when disarmed.
4. To finish up the test, confirm the LED on the siren cover
is flashing when the alarm is armed.
NOTE:
Only
ONE
Wireless External Siren is compatible with the Watchguard SMS 2010 alarm system. If
you require more than one siren, Wireless Solar Sirens should be installed instead. Wireless External Sirens
and Wireless Solar Sirens cannot be used together on the system.
Immediately press
Button 1, then
Button 2.
