Watchguard Firebox X1000, Reference Manual

Page: 227 / 264

Policy Manager
Reference Guide 215
Configure interfaces in Drop-in mode
Enable this checkbox to configure the Firebox in Drop-in mode.
The Interface dialog box changes to allow only one IP address and
Default Gateway. This is because in a Drop-in configuration the
Firebox is put in place with the same network address on all
Firebox interfaces.
Advanced Drop-In tab
Automatic
Enable this checkbox to make proxy ARP automatic for the related
hosts listed below.
Proxy ARP for hosts on the following network
Select the network, Trusted, Optional, or External, you want to
use proxy ARP.
Related Hosts
A list of related hosts that use proxy ARP.
Add
Enter the host IP address, select the interface, and click Add to
add a related host to the Related Host list.
Remove
Select a host IP address from the Relates Host list and click
Remove to delete a releated host.
Advanced DHCP tab
DHCP Initialization Timeout
Enter the duration in seconds the Management Station waits for a
response from the DHCP server. The Firebox receives the IP
address, gateway, and netmaks from the DHCP server managed
by your Internet Service Provider (ISP).
DHCP Device Name
Enter the host name that is used during the DHCP exchange.
DHCP Lease Time
Enter the amount of time in Days, h (hours), and m (minutes)
before the Firebox will renegotiate the DHCP lease.